4 Pair Utp Cable Video Power Data Balun With 16 Channel , Interference Rejection

4 Pair Utp Cable Video Power Data Balun With 16 Channel , Interference Rejection

  • 4 Pair Utp Cable Video Power Data Balun With 16 Channel , Interference Rejection
Packaging: Paper box

Product Description

 

1. Channel: 16 CH

2. Frequency Response: DC to 8MHz

3. Power: 12V-36V

4. Video Format: NTSC, PAL , and SECAM

5. Connector Video: Female BNC, RJ45 and Terminal Block

6. CMRR: 60 dB

7. Attenuation: 0.5dB Typ

8. Certification: CE,RoHS

 

4 Pair UTP Cable Video Power Data Balun with 16 Channel , Interference Rejection

 

Description:

 

The PVD3 Series is passive transceiver device that combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. At the camera end the single channel PVD video balun combiner provides video, power and data on separate outputs.

The PVD316M series is designed to be placed at a location between the cameras and control room to extend the video up to 1200m. Each camera power output is equipped with a self-resetting fuse for extra protection. The PVD316M series video signals are connected through RJ45 and Category-5 cables to passive or active UTP receivers at the control room. The data connections to the DVR are through RJ45 and Category-5 cables.

 

 

Features:

 

  • Combines video, power and data into a single RJ45 4-pair cable
  • Use with the power-video-data transceiver at the camera
  • Built-in passive transceivers with surge protection
  • 60 dB cross talk and noise immunity
  • Designed for structured wiring applications
  • Connectors: Video-BNC, UTP-RJ45, Power-"Press-Fit" terminal block

 

 

Technical specifications:

 

Video Format

NTSC, PAL , and SECAM 

Frequency Response

DC to 8MHz

Attenuation

0.5dB typ

CMRR

60 dB 

Impedance

Coax, Male BNC

75 ohms 

RJ45/Terminal Block

100 ohms

Working environment

Working Temperature  

-10℃ to +70℃

 Storage Temperature  

-30℃ to +70℃

Humidity 

0 to 95%

Wire Type

UTP5

Connector

Female BNC, RJ45 and Terminal Block

Power

12V-36V

Case

Metal

Dimension

430mm*44mm*33mm

Wight

0.86KGS

 

 

Wire Type:

 

The PVD system operates well with Cats or better UTP wire,24 AWG(0.5mm) or thicker.

Low voltage camera power video may be sent within same wire bundle.

Do not use shielded twisted-pair wire.

Do not use un-twisted wire.

Do not run 24V/28VAC within same wire bundle with telecom or other datacom signals

 

 

Power-Distance Chart:

 

Using PVD products, cameras can be powered at extended distances, please refer to the ctart below for more information.

 

Power Supply Voltage

24VAC

28VAC

13VDC

Resultant Camera Voltage

21VAC

21VAC

10VDC

100mA Camera

400m

800m

300m

300mA Camera

130m

260m

100m

500mA Camera

80m

160m

60m

1A Camera

40m

80m

30m

 

 

All RJ45 Connector follows industry-standard TIA/EIA 568B pinouts:

 

Camera Connections

Data Connections

Video Connections

 

 

Application Diagram:

 

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-3000 characters
Post Sourcing Request >>