Ce Video Power Balun With 16 Channel , 75 Ohms Coax Pvd Balun

Ce Video Power Balun With 16 Channel , 75 Ohms Coax Pvd Balun

  • Ce Video Power Balun With 16 Channel , 75 Ohms Coax Pvd Balun
Packaging: Paper box

Product Description


1. Frequency Response: DC to 8MHz

2. Channel: 16 CH

3. Video Format: NTSC, PAL , and SECAM

4. Connector Video: Female BNC, RJ45 and Terminal Block

5. CMRR: 60 dB

6. Attenuation: 0.5dB Typ

7. Power: Input: AC220V/110V output: AC26V

8. Certification: CE,RoHS


CE Video Power Balun with 16 Channel , 75 ohms Coax PVD Balun




The PVD 5 series is advanced device that combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. At the camera end the single channel PVD video balun combiner provides video, power and data on separate outputs. The PVD 5 series has built-in AC26V power supply. Each camera power output is equipped with a self-resetting fuse for extra protection.

PVD516M series is designed to be placed at a location between the cameras and control room to extend the video up to 1200m. The PVD516M series video signals are connected through RJ45 and Category-5 cables to passive or active UTP receivers at the control room. The data connections to the DVR are through RJ45 and Category-5 cables.





  • Combines video, power and data into a single RJ45 4-pair cable
  • Use with the power-video-data transceiver at the camera
  • Power: Build-in AC220V/110V to AC26V converter (Check power voltage)
  • 16 isolated camera power, 1Amax per channel
  • Built-in passive transceivers with surge protection
  • 60 dB cross talk and noise immunity
  • Designed for structured wiring applications
  • Connectors: Video-BNC, UTP-RJ45, Power-"Press-Fit" terminal block



Technical specifications:


Video Format


Frequency Response

DC to 8MHz


0.5dB typ


60 dB 


Coax, Male BNC

75 ohms 

RJ45/Terminal Block

100 ohms

Working environment

Working Temperature  

-10℃ to +70℃

 Storage Temperature  

-30℃ to +70℃


0 to 95%

Wire Type



Female BNC, RJ45 and Terminal Block


Input: AC220V/110V output: AC26V









Wire Type:


The PVD system operates well with Cats or better UTP wire,24 AWG(0.5mm) or thicker.

Low voltage camera power video may be sent within same wire bundle.

Do not use shielded twisted-pair wire.

Do not use un-twisted wire.

Do not run 24V/28VAC within same wire bundle with telecom or other datacom signals



Power-Distance Chart:


Using PVD products, cameras can be powered at extended distances, please refer to the ctart below for more information.


Power Supply Voltage


Resultant Camera Voltage


100mA Camera


300mA Camera


500mA Camera


1A Camera




All RJ45 Connector follows industry-standard TIA/EIA 568B pinouts:


Camera Connections

Data Connections

Video Connections



Application Diagram:


Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-3000 characters
Post Sourcing Request >>